Shakaworld3d Wicker Dragon Bust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model was inspired by the high back wicker Chairs
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 556
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club. There are two support tiers, one for those of you that wish to have access to my exclusive designs and those of you that
wish to have access to my exclusive designs and print/sell your prints(not my digital designs). In either tier you will have access to all of my available public and exclusive designs.
It is ok to show a printed model of my design in video or in an ad that is about 3dprinting otherwise please contact me.
Thanks again
Easy to print in place. Needs supports under the chin. I normally print with a .6 nozzle .18 layer height