1 / 9
Rope / Cord Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy way to store your Coiled Cordage / Rope / Cables, with a firm handgrip, and strong wall mount. Tested to hold 50lbs
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (31)Powiązane
Why
- I was tired of tripping over my extension cables in my garage. This problem overflowed into my trailer: I needed a secure way to store my cables, and hoses.
Features
- Easy to print, easy to assemble
- Lightweight, but sturdy, not visually heavy
- Components all 3D printed
- (2) screws attach to wall
- (2) m3x12 screws attach handle together
- Testing shows it can hold at least 50lbs
Print Instructions
- Use Default Prusa Slicer 0.30mm Draft Print Settings
- Wall Mount & Handle Filament : ABS, PETG, ASA
- Straps Filament : Flex (TPU)
- Supports : Needed on Wall Mount and Handle for supporting Bridging
- Infill : Triangles 20-25%
- Perimeters : 4, Top/Bottoms: 4
- All parts have been designed with an intended side that it is printed on to reduce necessary support material.
Non-Printed Parts
- (2) Drywall / Construction Screws
- (2) M3x12 screws
Installation
- Insert the (2) Straps into the Handle
- Screw the (2) pieces of the Handle together
- Insert the (2) Straps into the Wall Mount
- Attach Wall Mount to your desired location
- Done!