JeSc HyperCube XY Idler T16 v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original one was to fragile for my taste, so I decided to make my own.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 503
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Original one was to fragile for my taste, so I decided to make my own.
I used these pulleys:
https://www.aliexpress.com/item/2GT-16-teeth-synchronous-wheel-pulley-with-teeth-without-teeth-driven-Perlin-gear-bore-3mm-for/32812498943.html?spm=2114.13010608.0.0.hxhDyZ
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hsq5xWIxaYv
Print instructions
Unassociated tags: XY idler
Category: 3D Printer Parts Summary
Original one was to fragile for my taste, so I decided to make my own.
I used these pulleys:
https://www.aliexpress.com/item/2GT-16-teeth-synchronous-wheel-pulley-with-teeth-without-teeth-driven-Perlin-gear-bore-3mm-for/32812498943.html?spm=2114.13010608.0.0.hxhDyZ
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hsq5xWIxaYv
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
</div>Supports:No
Resolution:
0.16
</div>Infill:75%
Notes:
I used eSun PLA+ 90/212 Temps