Heart on a Stick / Prop for Photoboxes, Wedding, Anniversary, Parties
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this heart in Fusion 360 using round shapes and designed it to fit on wooden sticks (6mm diameter)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
EN:
I created this model using Fusion 360. STL is provided in here.
Use PLA, or any other material you'd like.
I recommend to use a drop of glue on top of the wooden stick. (If the stick is too thick, you might use some force or a small knife)
DE: Ich habe dieses Modell mit Fusion 360 erstellt, die STL findet ihr hier.
Ich verwendete PLA, andere Materialien sind aber auch möglich.
Einen kleinen Tropfen Kleber würd
Regarding the sticks: I used Bamboo/Wooden sticks with 6mm diameter i found here: https://amzn.to/3sCki9S
For PLA in Red i can recommend SUNLU PLA+ as its easy to print on most machines: https://amzn.to/3EhLuxj
*those are affiliate links, so when you were ordering trough one of those links, i will get a small comission. This is without any charge for you.
And of course: Feel free to use the model with other materials, colors.