JeSc HyperCube X-End Stop add-on v1.5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
On the original Tech2C parts my end-stop for the X axes did not work reliable enough.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
On the original Tech2C parts my end-stop for the X axes did not work reliable enough. Therefore I made this extra part to help the end-stop hit more reliably.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hSVbLV7xRl2
Print instructions
Category: 3D Printing Summary
On the original Tech2C parts my end-stop for the X axes did not work reliable enough. Therefore I made this extra part to help the end-stop hit more reliably.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/hSVbLV7xRl2
Print Settings
Printer:
Tevo Tarantula
Rafts:
Doesn't Matter
</div>Supports:No
Resolution:
0.16
</div>Infill:75%
Notes:
I used eSun PLA+ 90/212 temps