1 / 15
JeSc HyperCube Z-carriage (8mm, 8mmL & 10mm) v2.32 — zdjęcie 1
1 / 15

JeSc HyperCube Z-carriage (8mm, 8mmL & 10mm) v2.32

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

[UPDATE 2.32] I added LM10UU version as well (incl. LM10UU Z-Clamp). [UPDATE 2.31] I added LM8LUU version as well.

Ocena
0 / 5
Polubienia
1
Pobrania
55
Wydruki
0
Wyświetlenia
332
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

[UPDATE 2.32] I added LM10UU version as well (incl. LM10UU Z-Clamp).

[UPDATE 2.31] I added LM8LUU version as well.

With a single Z motor the bed kept tilting forward (8mm rods). I made this update to stop this forward tilt and make it more stable. Also I made it so that the bed can be adjusted forward by 2-2.5 cm if necessary. It helpt me to teach the full print surface without bumping the print head to the backside of the printer. Clamps for the 8mm versions are the original Tech2C clamps, so get them from his collection.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fl8nqvYwzlw

Print instructions

Category: 3D Printer Parts Summary

[UPDATE 2.32] I added LM10UU version as well (incl. LM10UU Z-Clamp).

[UPDATE 2.31] I added LM8LUU version as well.

With a single Z motor the bed kept tilting forward (8mm rods). I made this update to stop this forward tilt and make it more stable. Also I made it so that the bed can be adjusted forward by 2-2.5 cm if necessary. It helpt me to teach the full print surface without bumping the print head to the backside of the printer. Clamps for the 8mm versions are the original Tech2C clamps, so get them from his collection.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fl8nqvYwzlw

Print Settings

Printer:

Tevo Tarantula

Rafts:

Doesn't Matter

</div>Supports:

No

Resolution:

0.26

</div>Infill:

15%


Notes:

I used eSun PLA+ 90/212 temps

Tagi