1 / 3
Walksnail Avatar Fatshark Dominator Goggles 4 Antenna Faceplate Mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod for Walksnail Avatar Goggles that allows for 4 patch antennas on the outside at the front.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 973
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (10)Powiązane
Mod for Walksnail Avatar Goggles that allows for 4 patch antennas on the outside at the front. This eliminates the need for 90° adapters at the top of the goggles and it saves some space there too.
- Print on its front, use PETG at 0.2mm.
- Remove support roughly and use a sanding belt to get it smooth.
- Insert the SMA pigtails.
- Mount the fan using the two original screws.
- Use the SMA caps to cap off the holes at the top of your goggles,
but print these with TPU instead.
Changelog:
v1
- Testing myself.
v2
- Small improvements as a result of v1.
v3
- PCB fitting was too tight.
- Improved parting line.
- Reduced material around fan bed.
v4
- Increased front wall thickness for more finishing space.
v5
- Wider ribs to properly hold display connectors.
- PCB fitting was too conservative.
- Longer fan pins so one could melt the top to hold the fan in place.
Sorry for the many iterations!
I was making improvements based on testing and user feedback.
v6 is the final version!
v6
- Little bit more material between bottom fan holes.
- Small ribs to enforce airflow of fan.
- Fan can now be mounted using the existing fan screws.
- SMA threads stick out 0.3mm more.