1 / 3
TWJ Filament Joiner — zdjęcie 1
1 / 3

TWJ Filament Joiner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A guide for manually joining sections of filament with a soldering iron.

Ocena
4 / 5
Polubienia
20
Pobrania
143
Wydruki
1
Wyświetlenia
1064
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

A guide for manually joining sections of filament with a soldering iron.

The filament is fixed in the channels with screws and channel caps.

M2.5 screws (2.5 mm diameter). Nuts with a maximum outside diameter of 5.6 mm.

After placing the filament in the channel, first place the channel cap, and then gently tighten the screw.

It is strongly recommended to use a temperature-regulated soldering iron.

Tagi