Withings / Nokia Home Camera Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Withings / Nokia Home camera because it doesn't really come with one.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a mount for the Withings / Nokia Home camera because it doesn't really come with one. This has opening for all of the ports at the back of the camera and even openings on either side for the microphones on the camera. I have supplied 3 different versions. The one I have taken photos of has 2 mounting positions.
It does block the light on the bottom of the camera but you could just print this with a more transparent material than I did to get around that.
This requires supports, I printed it upside-down and deleted most of the supports in Cura so that only the centre had supports. I have supplied the Cura project file incase it may help.
This is designed to work with the Modular Mounting System designed by yyh1002.
Print instructions
Print Settings
Printer Brand:
Creality
Printer:
CR-10
</div>Rafts:No
Supports:
Yes
</div>Resolution:0.2
Infill:
25
</div>Notes:
If you use Cura like I did, try to use the support blocker tool to reduce the supports to just the centre