Honda CBR Logo Embossed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honda CBR Logo in raised 3D embossed font, suitable for CBR1100XX and possibly other models.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 744
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Honda CBR Logo in raised 3D embossed font, suitable for CBR1100XX and possibly other models.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
20%
Filament: Amazon Basics PLA Silk Silver
Notes:
This is about 275mm wide and stands 7mm tall, and fits diagonally on a 230 x 230 mm bed. You should even manage to print 2 at once.
I've used a 2mm brim on my Ender 5 S1 as the edges of the bed are cooler.
The logo is scaled to match the tank decal on a CBR1100XX as best as possible, but I've hand-crafted this from photos so some differences in the design might be included.
I've included models that are flat or curved 30 degrees to fit my bike. The curved design needs supports and takes longer to print but fits better.
If you want a design that covers the original “flat” CBR decals, I have v2 model here:
https://www.printables.com/model/904341-honda-cbr-logo-v2
Category: Automotive