Rigol DS1054z Shorty Legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are some short feet for a Rigol DS1054z (or any, I'm guessing, in the 1054 family).
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 641
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are some short feet for a Rigol DS1054z (or any, I'm guessing, in the 1054 family). I had been using some taller feet that were great, but the extra height got in the way of my tool storage wall behind it.
These slip on easily over the existing feet. And while it does raise up the scope a little higher than the built-in feet, it also feels far more stable perched on these. There's also a cutout to hold your probe out of the way when not in use on the front of each leg.
This would also be useful if the legs on your Oscilloscope have broken off, but you'd still like to be able to elevate it.
If you want them to be a bit more snug and not fall off if you move the O-scope, you and just shim them on with some strips of paper.
Print instructions
Prints on its flat side without supports.
Printer file sliced for PETG.