BMW E46 Roof Rails Replacement Part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for a BMW 2004 Touring. Fits for the screws to not scratch the paint.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
When I bought some roof rails, the flaps for the screws to not scratch the paint had been broken off. So I threw this quick redesign together. It's mostly a replica with slight adjustments for better printing.
DO NOT USE PLA, PETG, OR ABS
You should consider a high-quality, very weather and outdoor-resistant filament. I used CPE CF112. Alternatives may include PA CF12 or PP.
Print slow. Low to no fan. The chamber should be at least 40°C for best layer adhesion.
Works best with 100% infill.
Sadly I could not find the specific part number for this, I've heard a simple washer should do just as well. However, I'd like to keep it as original as possible with this, as it also helps with alignment.
Some potentially relevant parts pages:
- https://www.realoem.com/bmw/enUS/showparts?id=EN11-EUR-03-2003-E46-BMW-320i&diagId=51_3963
- https://www.realoem.com/bmw/enUS/showparts?id=EX31-EUR-10-2004-E46-BMW-316i&diagId=51_3960