1 / 4
Vise Dremel workstation V1.1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've created an other vise but this one is specifically designed for dremel workstation base!!!
- Ocena
- 0 / 5
- Polubienia
- 59
- Pobrania
- 273
- Wydruki
- 1
- Wyświetlenia
- 1479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (130)Powiązane
I've created this model in order to have a vise for my dremel workstation. I've not tested yet the designed as I have to print it but is pritty close, I need to check tolerances and so in order to check threads are working properly and so on.
Enjoy it!!! And as always feedback is welcome, I read you in comments!
Changelog:
- 2nd Sept 2023:
- I changed the design in order to be functional, the screw has been split in 2 pieces. The piece is inside the jaw will include now and m3 insert and m3 bolt in order to be able to put the screw in the position and later mount the front piece, you will see it clearly in inspection screenshot I've added.
- I checked the tolerances for the thread incresing them in the screw and in the bolt, now tolerance is little bit more of 0.2mm.
This design is still in review please consider it before print it!!!