1 / 7
Sewing Cloth Tape Measure Winder Case 14mm and 18mm Snap Fit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sewing Cloth Tape Measure Winder Case 14mm and 18mm. Super simple two piece snap fit.
- Ocena
- 4,691 / 5
- Polubienia
- 652
- Pobrania
- 2336
- Wydruki
- 62
- Wyświetlenia
- 9355
- Oceny
- 55
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 62) (Komentarze: 76)Remiksy (1)Kolekcje (1091)Powiązane
Sewing Cloth Tape Measure Winder Case 14mm and 18mm.
Super simple two piece snap fit.
Assembly (see photos):
- Push tape through thinner slot, same side as winding hole.
- Fold tape and reinsert from back.
- Pull tape tight trying to keep the tape centered top to bottom
- Align tape with slot in the top and snap the top on.
Print instructions
No supports required