Wandering clock stand for Desk/bookcase with integrated wall mount -easier build - no ikea clock required - geneva drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
stand/wall mount for the wandering clock mechanism
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 266
- Wydruki
- 3
- Wyświetlenia
- 2572
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print
This is a frame and stand for the wandering clock model:
https://www.printables.com/model/327198-improved-wandering-hour-clock
stand uses two m4-12 bolts and nuts
this replaces the CentralGearHolder.stl in the original set of files, this also eliminates the need for an ikea clock and the associated drilling/modification of one, so you also will not need those templates
I also recommend using sufficient infill on the narrow parts, I printed at .30 with 50% gyroid infill on the hook and main structure