LED grid (parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I remixed this because I wanted room for the components between LEDs on the matrix. This is set for a 16x16…
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 326
- Wydruki
- 1
- Wyświetlenia
- 1344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I remixed this because I wanted room for the components between LEDs on the matrix.
This is set for a 16x16 grid https://www.amazon.com/dp/B088BTYJH6
or https://www.aliexpress.us/item/2255800358269772.html
Print Settings
Printer Brand:
Anycubic
Printer:
Kobra
Rafts:
No
Supports:
No
Resolution:
.1
Infill:
n/a
Filament: Any Any Any
Notes:
As @GingerBrandon said (for the diffuser):
I added a thin diffuser model. To use this, print it front side down and switch from white to black a few layers into the grid by "pause at layer" and switching to black. Don't do it at the first grid layer or you may get black scraping snot lines onto the diffuser.
How I Designed This
Modeled by scratch with Fusion 360. This is fully parametric to make a grid whatever size you want.
Parameters for:
X dimension count
Y dimension count
Height
Square size (if your LEDs are 10mm on center, then set this to 10mm)
Diffuser height
Category: Electronics