1 / 2
Katsuyama Neighbourhood - Hueforge Print — zdjęcie 1
1 / 2

Katsuyama Neighbourhood - Hueforge Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hueforge print of the Katsuyama Neighborhood (ca.1929–1932) print in high resolution by Hiroaki Takahashi.

Ocena
0 / 5
Polubienia
18
Pobrania
48
Wydruki
0
Wyświetlenia
269
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Katsuyama Neighborhood (ca.1929–1932) print in high resolution by Hiroaki Takahashi. Original from The Los Angeles County Museum of Art.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

  • PLA Brown
  • PLA Grey
  • PLA Cream (Overture Brand, it's a light orange)
  • PLA White

Swap Instructions:

  • Start with Brown
  • At layer #18 (1.52mm) swap to Grey
  • At layer #22 (1.84mm) swap to Cream
  • At layer #28 (2.32mm) swap to White for the rest.

Your filament settings and mine may differ in TD, so best to adjust yours according to your known TD filaments.

Category: Other

Tagi