Corsair 4000D SSD Tray SSD Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found that the Corsair 4000D included just two SSD trays but has 4 slots to mount them. So I created one to print.
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 683
- Wydruki
- 0
- Wyświetlenia
- 4121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I've noticed that Corsair only includes two SSD mounts in their Corsair 4000D Airflow case but offers four spots to mount them.
Since I have some additional drives laying around and need those four slots, I jumped into CAD and copied the design.
Everything fits perfectly and you should even be able to use the standard thumb screws (5mm-6mm thread length) instead of the ones corsair provides with the case (7mm thread length) when choosing the -5mm- file. Corsair does add two extra thumbscrews with the case, but maybe someone lost theirs.
Support:
The print does need support.
Material:
- PLA should be fine except when you know the drives will get hot and will get a lot of use.
- PETG/ABS is recommended - with ABS you have to check the tabs for strength or else they might break while mounting.
If you liked the print please post a make and leave a like
Thank you <3
and have a great day
If you really really liked my model you can buy me a coffee here: paypal.me/christophsandker