1 / 4
Raiser / stand for MikroTik RB5009UG+S+IN / RB5009UPr+S+IN POE IN/OUT router — zdjęcie 1
1 / 4

Raiser / stand for MikroTik RB5009UG+S+IN / RB5009UPr+S+IN POE IN/OUT router

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a stand / raiser for the MikroTik RB5009UG+S+IN router to improve cooling and cable management

Ocena
0 / 5
Polubienia
33
Pobrania
283
Wydruki
0
Wyświetlenia
2145
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
GNU General Public License v2.0

Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router.

With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to improve device cooling. The stands can be mounted to the surface by two screw holes. You can either choose an inward or outward facing of the mounting holes. Just swap the stands. The router itself can me fixed with standard M3x8 to M3x10 screws with the help of the printable washers.

 

I recommend first turning the screws in the stands without a router installed to form the threads in the plastic. I am not responsible if you damage your device. 

 

Tagi