Badger 2040 cover LiPo remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a slot for a 500mAh LiPo battery with cable routing
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Love the badger cover by fneb, it is a perfect fit and ultra minimal. And included the .step file I needed to make my own.
I have made the following changes:
- Added slot for a 500mAh LiPo battery, with cable routing.
- Added M2 hex nut slots.
- Increased overall thickness by .3mm so screws sit flush with the backside
- Sealed away the qw/st port and pinout as I don't use these.
Update: added a new variant with a small rounded lanyard hole instead of the elongated slit. This works better when wearing the badger at conventions. Also includes protective sleeve to be printed in TPU.
Print with support.
Assemble with 4x 8mm M2 screws and nuts (I used these https://www.aliexpress.com/item/4000062956240.html ).
Lithium cell sits snugly inside and does not touch any components. 1mm of plastic between it and your chest. Be careful not to puncture it as lithium cells can cause fires.