Ratchet for Filament Spool Switcher & Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a ratchet to avoid damaging the original Filament Spool Switcher & Winder due to the torque during braking when
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 1112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Original filament spool switcher & winder
https://www.printables.com/model/407688-bambu-lab-p1-x1-x1c-x1cc-filament-spool-switcher-w
I used the above model as a handle, but when I used it with an electric screwdriver, there were many cases where the shaft was damaged by the rotational torque of the filament accelerated during braking.
I created a ratchet adapter for this electric screwdriver.
Use either Ratchet_For_Hex or Ratchet_For_Gear_25_teeth so that the electric driver's brakes are not transmitted when braking.
When using it, it is necessary to push it in a little to prevent the inner shaft from spinning.
