6U Gridfinity Modular Drawer System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I loved Chipp Walter's Gridfinity drawers, but I saw a few people wished it featured 6U drawers. Well here it is!
- Ocena
- 5 / 5
- Polubienia
- 243
- Pobrania
- 1218
- Wydruki
- 8
- Wyświetlenia
- 6948
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Here is the full set of 6U drawers. I have also included a reduced filament hex model which is the one I have personally verified. It still fits with Walter's system, its just taller!
Unfortunately I primarily use ABS so experienced extreme warping even with glue and sticking the build-plate down with Kapton tape, so I would advise against using this material. I used the original handles, scaled in XY by 120% and it seemed to be a nice press fit, however I still bungled one of them.
I will continue to iterate on this design for a while; I have a few more adaptations of the shell and drawers if anyone is interested as well.
Printing recommendations:
PLA or PETG
Back on the build-plate
0.16mm layers
15-20% cubic infill
Infill combination ON
Normal supports at 45deg
My print settings (Which I don't recommend):
eSun ABS+ White and Bambu Lab ASA Blue
0.16mm layers
20% cubic infill
Infil combination ON
Normal supports at 45deg
5mm brim; Object gap 0.1mm