Tent Peg/Stake Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
To help the insertion of lightweight tent pegs into tough ground.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 800
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this specifically for the AlpKit lightweight V Shaped tent pegs to make it easier to push them into hard ground my hand or foot.
It looks like they have changed their design now, but there are other V shaped pegs out there that these may help with.
I've included a small “Test” piece with the same peg shape dimensions as the main file so you can save some filament and time testing it'll work with your own pegs.
Print Recommendations
Print with a high infill
3+ perimeters
A few top and bottom layers for strength.
Support the large overhang by painting on supports (Prusa/Super Slicer)