1 / 4
Simple compacted hinged infrared camera holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I required a small compact holder for my cheap infrared camera.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I required a small compact holder for my cheap infrared camera. to mount it between my print head and enclosure back wall. This gives a decent view for the required space.
NOTE: Check the provided drawing if your camera has the right hole spacing.
Required parts:
- 3x M3 washers
- 1x M3x30 screw
- 1x M3 nut
Print instructions:
- Filament of your choice, I recommend a higher temperature proof material for enclosed printers, e.g. PETG.
- 0,2 mm layer height
- NO supports needed
Assembly
- Screw the camera onto the back plate.
- The stock screws and nuts from the camera should work.
- Install the back plate in the fixed plate.
- Insert M3 washer between back plate and fixed plate to allow for smooth operation.
- Install the camera with holder in the printer.
- I used double sided tape but there are screw holes available, too.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.