Pin Board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For storing all of those enamel pins flush on your wall
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 190
- Wydruki
- 0
- Wyświetlenia
- 1711
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Important print grid infill at least 30 percent prob 35 to 40 with no top or bottom layers(layer height can be high) attached photos, 3mf included has 45 % infill, not much should need to be changed, you can always use differing infill like hex if you so desire, this is around 7 in by 8 in but you can scale it without any side effects to any size within reason so keep that in mind, I can make edits to the model if you need them. Made these to store pins I had kicking around on the wall. this does need supports to work any type should work but Ive used grid.