MIG-41 Concept
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
KitCard build of one of the concept models for the yet to be released MIG-41
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my 2nd creation of a fighter jet Kit Card, one of the concept designs for the MIG-41. I've seen this around and I like the slick design of it. To try something new, I used some angled cuts for how some of the parts fit together and it printed and fit together quite well. To make sure it was built the right way, I put in some carve outs of the weapon bays. I will work on landing gear in a bit, as the single engine fuselage design I built does not easily give room for that.
I know it seems like I am favoring Russian designs with the 2 I have built, but I wanted to stay away from ones that have already been built that I took my inspiration from. The next one I have been working on has been a bit more tricky, and may take me a while to work some things out, but I've been having fun with these designs.
Hope you enjoy.
Instructions:
Printed with PETG, 0.30mm layer height on a Prusa MK3s
Not much to say here. For the main wing part, the 4 long rectangular weapon bays are on the bottom. Same with the horizontal nose pice, which lines up with cuts on the bottom of the wing part. The Tail fins are cut in a way that they can only go on the proper side.