Repair piece for air slider of Ernesto fridge storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is collection of repair pieces for an Ernesto fridge storage box from the German discounter Lidl. 100341578001
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is collection of repair pieces for en Ernesto fridge storage box from the German discounter Lidl.
I had the original plastic clips break after the slider got stuck. I then designed some repair pieces which you can press fit or glue into the slider. There are several models available depending on the repair you want to carry out, see details below.
Article number: 100341578001
Link to storage box: https://www.lidl.de/p/ernesto-kuehlschrankaufbewahrung-frischebox/p100341578001
Files provided
- Single repair piece short (needs to be glued)
- Single repair piece long (pressfit)
- Double repair piece long (pressfit)
- Complete slider (not recommended to print, the clips are prone to break)
CAUTION - INFO:
Info - Longtime use
On long time use with hot water or dishwasher cycles the part might shrink, as you can see in the photos. If you encounter I recommend you glue the part in place.
Caution - Not tested models
I did not print the “repair_piece_double_long” version and the “air_slider_print”. It is designed based on measured dimensions. Please check physical dimensions before printing.
Print instructions:
- recommended layer height 0,2 mm
- No supports needed (the clip has 90° overhang but should print fine with good cooling)
- I recommend to print out of a dishwasher durable material.
- Make sure your printer is tuned to make accurate dimensions for a nice press fit.
- Make sure to measure your part first and adjust for material shrinkage to get a nice press fit. You might want to use some super glue.
I would be happy to see some of your makes posted :)
Source files in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.