Paracord ball keychain
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ball shaped keychain looking like an object made of paracord. The ball is hollow. Diameter 42 mm (1.65 inches). This…
- Ocena
- 5 / 5
- Polubienia
- 127
- Pobrania
- 389
- Wydruki
- 2
- Wyświetlenia
- 2442
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Ball shaped keychain looking like an object made of paracord. The ball is hollow. Diameter 42 mm (1.65 inches). This is an easy print. The ball comes in two parts which must be glued together. There is a 4 mm hole to fix a string.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm initial layer, 0.2 mm layer height
Infill:
10 %
Filament: TINMORRY, ESUN, RED PLA Light skin, olive green, orange
Notes:
No supports required. Just do not go crazy fast to print the fine details nicely. I have chosen a maximum of 70 mm/s.
Fit a string through the hole of the lower part and add some knots to fix it. Glue the two parts of the ball together. Use a rubber band to hold the two parts together till the glue is hard. Make sure that the parts align perfectly.
This object was designed with Blender. I had a big headache during the design of this non linear object. But finally I got the object finished.
Category: Keychains