Realistic wooden chair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a high quality model char. The chair is 14 cm (5.5 inches) high and 7 cm (2.8 inches) wide. It looks like a…
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 238
- Wydruki
- 2
- Wyświetlenia
- 1076
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a high quality model char. The chair is 14 cm (5.5 inches) high and 7 cm (2.8 inches) wide. It looks like a tiny real chair. It consists of 12 parts which must be glued together. It is an easy print without supports.
The item "Seat plank inner V1.stl" must be printed 5 times, all other items once.
If you choose a brown color, your chair looks like it is made of wood.
If you need a table for your chair, you can find it here:
https://www.thingiverse.com/thing:5807470
The chair fits well under the long side of the table.
If you would like to put something on your table, consider printing my tiny coffeepot set:
https://www.thingiverse.com/thing:5817396
Enjoy printing this object.
Print Settings
Printer:
FLSUN Super Racer
Rafts:
No
Supports:
No
Resolution:
0.2 mm initial layer, 0.2 mm layer height
Infill:
20 %
Filament:
GIANTARM PLANew Brown
Notes:
Arrange all items on the printbed.
Arrange all items on the printbed in your slicer, see example below with already printed items
Chair assembly part 1
Glue the seat support to the left and right char parts. Note the orientation. The smooth part is at the front of the chair.
Chair assembly part 2
Glue the leg support to the legs. Please note that the leg support fits into slots in the back legs
Chair assembly part 3
Glue the back planks to the chair.
Chair assembly part 4
The front and back seat planks are different. The wider item goes to the front, the other to the very back. The 5 uniform planks are in the middle of the seat. Make sure that all seat planks are well aligned.
This object was designed with Blender.
Category: Model Furniture