Skeleton cube object
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a nice object of art. It can be printed without supports. However I have big problems printing this object…
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a nice object of art. It can be printed without supports. However I have big problems printing this object with my FLSUN Super Racer. The edges of the overhangs are curling upwards whatever settings I choose in the slicer program. Sooner or later the object is knocked over by the print head. I have even upgraded the Super Racer with 5015 fans and with an original Volcano Heatblock.
With the Ender 3 V2 this object prints without problems.
I have provided 3 sizes for you.
Small = 50 mm height (1.97 inches)
Medium = 100 mm height (3.94 inches)
Large = 150 mm height (5.91 inches)
If you need another size, you can resize the object in your slicer program without any problems.
Enjoy printing this object.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.15 mm layer height
Infill:
20 % Zig Zag
Filament: Verbatim PLA White
Notes:
Do not use a high print speed. 30 - 50 mm/s is Ok.
This object was designed with Blender.
Category: Sculptures