Sprite Pro Reverse Bowden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reverse bowden adapter for the Creality Sprite Pro extruder.
- Ocena
- 5 / 5
- Polubienia
- 85
- Pobrania
- 602
- Wydruki
- 3
- Wyświetlenia
- 3027
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This upgrades the Creality Sprite Pro extruder to a reverse bowden setup. I have only tested this on an Ender 3 V2, so please feel free to remix according to your setup.
Note that one of the parts listed is an M10-0.75 x 5mm heat set threaded insert. This is where the PTFE connector screws into on the extruder mount. I used the one in the original Ender 3 V2 extruder (removed with soldering iron at 250°C).
In the future I'd like to make a version that uses heat set inserts for every PTFE connector mounting point, but for now the Coupler just uses printed threads.
I've attached images of the best print orientations.
BOM
| Quantity | Item | Layer Height (mm) | Infill (%) | Material |
| 1 | Coupler.stl | 0.8-0.16 | 25-50 | ≥ PLA+ |
| 1 | Top.stl | 0.16-0.24 | 25-50 | ≥ PLA+ |
| 1 | Bottom.stl | 0.16-0.24 | 25-50 | ≥ PLA+ |
| 1 | Mount.stl | 0.8-0.16 | 100 | ≥ PLA+ |
| 4 | M3x6mm heat set threaded insert | |||
| 4 | M3x4mm heat set threaded insert | |||
| 1 | M10-0.75x5mm heat set threaded insert |