Street Signs Base and Poles (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add versatility to JamesThePrinter design "Decorative Street Signs" with base diameter and pole length options.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 1202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked JamesThePrinter's design, but I wanted a little versatility. So, I reduced the base diameter from 135mm to 100mm, and extended the pole to be taller. I have provided many options to customize your base and pole sizes.
***Important Note***
Use the Lower Sign Holder - High Clearance & Upper Sign Holder - High Clearance from JamesThePrinter's design (https://www.printables.com/model/522339-decorative-street-signs) for the best fit with my pole options.
Base Options
-85mm diameter
-100mm diameter
-118mm diameter
-135mm diameter
Pole Option
-110mm
-138mm
-166MM
-194MM
Print Settings
Base and poles were printed at 0.20mm layer height. It is highly suggested to use a brim when printing poles.
Assembly
I used CA glue to attach the pole to the base. And used the same CA glue to attach the Lower Sign Holder to the pole.