1 / 1
Macintosh Quadra 700 NuBus slot cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cover/faceplate for the Macintosh Quadra 700 NuBus slots. Might work for other macs.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover/faceplate for the Macintosh Quadra 700 NuBus slots. My Q700 didn't come with any and I haven't been able to find any original ones, so I came up with this.
I haven't tried it on other Mac models, but it should work if the design is the same as the Quadra 700.
I recommend PETG rather than PLA, since PLA is brittle and the tab will break off easily.