1 / 2
Ariane 5 - Recut Body for Prusa Mini (or other Printers with 180mm height) — zdjęcie 1
1 / 2

Ariane 5 - Recut Body for Prusa Mini (or other Printers with 180mm height)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Recut and added connectors for the Ariane 5 body parts by kmobrian - Now it is printable also on the Prusa Mini

Ocena
0 / 5
Polubienia
3
Pobrania
35
Wydruki
0
Wyświetlenia
196
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

The original Model is very high quality, but could only be printed on Printers with a z-height of around 20 cm, even with the already parted body.

I recut the full body into two smaller pieces, and added connectors in Prusaslicer. The cut is hidden in a small recess of the model. I reccommend using the provided .3mf as all necessary supports are already in there. Also, Prusaslicer will not let me export the connectors for the top piece into the seperate stl, please take that into account.
Print time was just under 6 h.

All credit for the model goes to kmobrian, all the rest of the parts can be found in his model.

Tagi