Kick stand foot for bikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A kick-stand foot shaped like a... foot.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 2025-08-18: Added a high-res version, for a print with more detail.
Update 2025-03-27: v2: Better angle on the foot and cleaned up mesh.
Mix of shaft/hole with model of a foot*
Fitted to 12x11mm “tear-shaped” stand (see photos). The slit in side of shaft/hole (and printed in TPU) is meant to give some flexibility to fit slightly different size and shape of kick-stand. Zip-ties are used to hold it in place.
The mesh has some flaws but Bambustudio/Prusaslicer interpreted it OK.
Printed in TPU 95 with 30% infill, in the upside-down orientation with some supports (see photo of slicer).
I'd love to see remixes or touchups to the model/mesh.. I'm sure there are many out there who can make improvements on this, however small.
* Foot model by danmars https://skfb.ly/oHsMX