1 / 3
Gridfinity Battery CR2032 holder with hole
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 1x1 box to keep CR2032 and a hole for smaller batteries, for example LR44.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 303
- Wydruki
- 7
- Wyświetlenia
- 1041
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- BSD License
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 7) (Komentarze: 8)Remiksy (0)Kolekcje (76)Powiązane
About:
I usually use CR2032 and small button batteries (such as LR44) only, and could not find anything small that would suit my needs.
Can be used with 6x2mm round magnets used in gridfinity sets.
Big hole diameters - the one on the top left:
- width: 14mm (AAA will fit, but some AA will get in with a bit of force, especially accumulators)
- depth: 36mm
- depth: 14mm
Please give a like and post makes and provide comments for further improvements.
Remix:
- original model is Gridfinity 1x1 Battery Storage CR2032 & CR2430 by @scheff https://www.printables.com/model/371874-gridfinity-1x1-battery-storage-cr2032-cr2430
- remixed by adding hole instead of slots for CR2430.
Printing:
- no supports
- no brim
- infill 10%
- screenshots from using Devil Design Transparent PETG, 0.4mm nozzle, 0.25 layer draft profile, speed 200% on Prusa Mini+, which effectively takes about 25min.