1 / 1
Bambu Lab - Filament Poop Bin - 2mm wall - internal magnets and thinner version
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of @benp_1165147's remix of @EnricoPulvirenti version with internal magnets.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 191
- Wydruki
- 0
- Wyświetlenia
- 1716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (12)Powiązane
Internal magnet
Remix of @benp_1165147's remix of @EnricoPulvirenti version with internal magnets.
Thinner version
There is also another version which is thinner (not as deep).
Print settings
- Pause to insert magnets
- Pause at beginning of layers 423 and 598 if printing 0.2mm layer height
- Pause at beginning of layers 353 and 499 if printing 0.24mm layer height
Key points
- 2mm walls
- Internal 6x2 mm magnets