Parametric Door Handle Bumper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric door handle bumper inspired by kulfsson's Door handle bumper on thingiverse.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 378
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
This is a parametric door handle bumper inspired by kulfsson's Door handle bumper (Thingiverse).
I have a rectangular door handle so I created this version to allow for rectangular and circular holes. It's not as smooth/curvy as the original, but it works well.
When I measured the door handle I rounded down, cutting off about 0.5mm for a snug fit.
Things that can be customized:
- Shape of each hole (rectangular, circular)
- X and Y dimensions of each hole
- Thickness of the wall of each hole
- Distance between the two holes
- Height
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2
Filament:
Priline TPU (98A)
Notes:
I used Priline TPU (Shore 98A) with a 1.5mm wall on the bumper side and a width of 10mm, which flexed some but not much. A more flexible filament might work a little better. Infill didn't matter as mine was so small it reverted to solid anyway.
Originally posted to Thingiverse.