Samsung Galaxy J7 Prime / On7 Prime g610 case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cases for the phone Samsung Galaxy J7 Prime. Models started with g610.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 241
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Originally posted on Thingiverse here: www.thingiverse.com/thing:2825299
This case is for the phone Samsung Galaxy J7 Prime, that is g610 models; do not confuse with the J7 2016, j710 models.
Some of the models are designed for rigid materials and others for flexible ones.The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.
The model for holding a pen was suggested by PoetsEspresso.
This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.
Por el día de la independencia argentina, el 9 de Julio, voy a actualizar algunas de las carcasas para celulares con una versión que haga alusión a la bandera argentina. Por la finura de algunas partes, este diseño sólo es posible en celulares relativamente grandes.
For other phone cases check this.
Here is the explanation of the files names:
- Flex: made for elastic filaments like TPU. Tested on TPU.
- Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.
- Aired: It is widely opened in the back so that the phone can dissipate the heat easily.
- WG: suggested for white and gold models. It's better to print it in darker colours to make contrast.
- B: suggested for black (dark gray) models. It's better to print it with light or transparent filaments.
I spend part of my time making these models, letting them available and free for everyone. If you want to support my work you can buy me a coffee in Ko-fi:
Si estás en Argentina podés invitarme a un cafecito:
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.