1 / 1
5 Gallon Bucket Handle - No Glue, No Screw, No Support — zdjęcie 1

5 Gallon Bucket Handle - No Glue, No Screw, No Support

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bucket handle replacement. Made for the Home Depot "Homer", but will work with others. Glueless slotted dovetail joint.

Ocena
5 / 5
Polubienia
42
Pobrania
417
Wydruki
4
Wyświetlenia
1242
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Created specifically for the Home Depot “Homer” bucket, this version was modeled solid, then sliced with PrusaSlicer's new cut tool to give it a tapered dovetail slot which, depending on your tolerances should wedge into place for a comfortable grip.

I've included the un-cut version as well if the tolerances don't work well for you. These tolerances were done with using HIPS and a .6mm nozzle, so it may require tightening up with a precise print with a detail nozzle.

I was able to print with no support, and no brim. Pure print in place.