1 / 2
Megami Device Display Base
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A display base featuring the Megami Device logo
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 1826
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Updated: 9/5/23 - added version C and updated design language to fit my 30ms base
A figure display base featuring the Megami Device logo. I designed this for use with an Action Base 6 arm, the hole for the arm peg is 4mm. May fit arms from other bases assuming they are also 4mm, but I don't have any others to test with. Please leave a comment if you have success with other arms.
There are two versions:
- Base A: two parts, the rectangular base and the logo which snap fits on top. Easier to print, go with this version if you want the rectangular base and are cool with just 2 separate colors.
- Base B: Similar to above, but more annoying to print since each inlay is a separate piece. Allows for separate colors for the inlays. Bezel does not snap fit, will need glue. Go with this if you want a separate color for the bezel, inlays and rectangular base.
- Base C: Two parts, but instead of a rectangular base, it's just an outline of the bezel.