Filastruder Extended Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fusion of the original Filastruder acrylic panels and MrFlippant's electronics box.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A fusion (and remix) of the original Filastruder acrylic panels and MrFlippant's electronics box. This keeps everything inside as one unit but keeps it away from the metallic moving parts where you don't want wires and connections in close proximity to each other.
This is still a work in progress. However, the main parts are there. Some or all can be possibly printed on a larger machine. Or better yet, cut new acrylic or aluminum on a CNC. I've resketched the main body side panels and some of the ends from existing dimensions and made it larger to accommodate MrFlippant's electronics box layout. This keeps from having to string wires between units. I've included Fusion 360 and step files for further mods. This one is for horizontal mounting to a wall or on a bench. I'll also be doing a vertical mount version.
A couple changes:
- Made the front faceplate thinner from original Filastruder acrylic so that the power and motor switches will properly seat with their tabs and not fall out.
- Correctly sized the fan hole for the top panel. Acrylic panel hole was oversized past the fan frame showing air space.
- Added a bottom closeout plate.
The extruder plate and angled plates can be reused from the original acrylic kit. I may sketch these and update later.