1 / 2
Pistol Crossbow Bolts, 6.3 and 6.5 inch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable crossbow bolts for small pistol crossbows such as the Adderini. They are 6.3 and 6.5 inches in length.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 1026
- Wydruki
- 2
- Wyświetlenia
- 2651
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (117)Powiązane
These bolts work okay for target practice, although not with the best accuracy. Assuming normal target blocks are used, the tips should be fairly durable and last a while.
They do not require any supports but do need a 10 mm wide brim as they are best printed straight up and down. For material I would use PLA+, Nylon CF, or PC. I also recommend printing on 100% infill.
At some point I will likely revise these to fit metal tips when I can find some for ¼ inch diameter bolts.