SV06 Pi Case Holder for Malolo's Snap Fit Pi Case Customizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made SavageLau's SV06 Pi mount work with Malolo's screw-less / snap fit customizable Raspberry Pi 4 Case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I modified this to work with the 20mm Top version of Malolo's screw-less / snap fit customizable Raspberry Pi 4 Case & Stands. I dropped my mod in Malolo's customizer. You have to insert the file location for the included Case_Clips.stl for the modifier to work. I only set it up for the 20mm top version, but it should work for the 25mm version as well. The .scad file you need for the top customizer is named Case_Top_Color1_SV06_Mod. I included the stl for the top configuration I chose for myself with the camera and display ribbon cable access. print any version of Malolo's bottom to match. Malolo's put a lot of work into the customizer so you can really make the case to your liking. The case will need supports while printing.