1 / 2
TwoTrees Blu-5/Bluer Plus Runout Bowden Tube Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a adapter that allows you to attach a bowden tube to the runout sensor. You'll need to replace 2/3 screws of…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a adapter that allows you to attach a bowden tube to the runout sensor. You'll need to replace 2/3 screws of the runout sensor with longer m3x25mm screws, and replace the two screws that attach to the electronics housing with m3x8
Uses this connector (type C): https://www.aliexpress.us/item/3256802572907275.html
Category: 3D Printer Parts