TwoTrees Sapphire/Sappheiros Pro/SP-3 Heated Bed Drag Chain Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a heated bed dragchain kit for Two Trees' Sapphire Pro that is compatible with/without the enclosure, and you…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a heated bed dragchain kit for Two Trees' Sapphire Pro that is compatible with/without the enclosure, and you do NOT need to drill any holes. It took me 17 10x10mm drag chain links to connect the base with the heat bed. You will need to buy one of each of these:
- M5x16mm screw
- M3x8mm screw
- M3 20 Series Sliding Drop-in T-nut
I added a .stl so you can print the drag chain,but in my opinion just buy the drag chain
Drag chain: https://www.amazon.com/gp/product/B074Z62KLQ/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
M3 20 Series Sliding Drop-in T-nut: https://www.aliexpress.com/item/4000149500597.html?spm=a2g0s.9042311.0.0.27424c4dMPf4XQ
I recommend printing the heated bed bracket, and links @ 50% infill and/or 3 line thickness walls so they don't break snapping the links together.
Print Settings
Printer:
Sapphire Pro
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
25%
Filament:
Polymaker Polyflex PLABlack
Notes:
Change log:
**12/30/2020** - Installed new parts on printer, everything is good now.12/28/2020 - I'M CURRENTLY RE-DESIGNING THIS.The extruder was touching the chain on the heated bed when homing the XY axis, sometimes preventing it from homing correctly. I have already modified the parts and will upload (today or tomorrow) when I know the changes i made work.
Category: 3D Printer Parts