1 / 8
Garmin Edge / Wahoo mount for Rose Xlite bike with aero handlebar — zdjęcie 1
1 / 8

Garmin Edge / Wahoo mount for Rose Xlite bike with aero handlebar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Light weight Garmin Edge / Wahoo mount for Rose Xlite 04 and 06 bikes with aero bars.

Ocena
5 / 5
Polubienia
51
Pobrania
1155
Wydruki
3
Wyświetlenia
8416
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

v2: 

  • Top surface is flat now so it can be easier to print upside down
  • sturdier constrcution through softer radii 
  • Original Garmin and Wahoo mounts can be used with screw holes, mounts will fit without protruding

 

Update: Wahoo compatible model uploaded. To be tested since I only changed the orientation of the Garmin mount by 90°. Feedback appreciated!

 

Since there is only one crappy overpriced Garmin Edge mount from Rose that fits their Xlite aero bar I designed my own. I use the Edge 830 and haven't tested it with bigger models yet. 

Weight with 20% infill: 16 g

Total weight with two M5 x 20 screws + washer: 25 g
 

Layer height: 0.20mm

Infill: 20 %

Wall loops: 4

I recommend printing it in the oriantation that I defined in the stl and use supports. This ensures a good quality fit of the mount.

Tagi