Board Mount for A2D Electronics 64CH DAQ V1.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rudimentary mount for the A2D 64CH DAQ board with cable clips
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A mount for the 64 channel data acquisition board by A2D Electronics available here.
I printed the entire bottom plate with 0 top and bottom layers and hex infill to save filament and make it a bit more flexible to snap around the edges of the board.
The clips at the sides for holding the cables should be printed with 100% infill, but the do break still break easily due the bad print orientation. I plan to make a version that has the cable clips as separate parts that will snap in to the board so they can be printed in the optimal orientation.