Small lathe improvements: Modular magnetic QCTP tool holder for mini lathe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My modular tool holder for QCPT (cheap chinese aluminium version - like this…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 664
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My modular tool holder for QCPT (cheap chinese aluminium version - like this https://www.aliexpress.com/item/32891663898.html)
When buying the aditional holders, I found that there are probably two versions with different angles (Your variant may not fit!).
The modules are connected by connectors. A small magnet (disc 10x3 mm) can be inserted into each module. Mounting with screws is also possible. For vertical placement, two more modules with larger magnets (cylinder 10x20 mm) can be seen on the sides (Figure 2-5).
The modules are printed without supports, as shown in Figure 1.
Print Settings
Printer:
Molestock
Rafts:
No
Supports:
No
Resolution:
layer 0.2 mm (nozzle 0.4 mm)
Notes:
Printed from PLA with 30% linear infill.
Category: Tools
(Originally published on Thingiverse.com - May 29, 2020)