Small lathe improvements: proxxon to lathe mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Proxxon Micromot to small "hobby" lathe mounts. Only for plastic or aluminium works! (Toolpost version is for 60 x 60…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Proxxon Micromot to small "hobby" lathe mounts.
Only for plastic or aluminium works!
(Toolpost version is for 60 x 60 mm toolpost.)
Print Settings
Printer:
Molestock
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
80% octagonal
Notes:
Printed from metallic "silver" PLA with 80% octagonal infill (if suitable orientation supports are not necessary, swivel version needs supports to 7 mm height).
For long work I recommend to print from PET or Nylon (Proxxon is heating and PLA is not optimal in this conditions).
Category: Machine Tools
(Originally published on Thingiverse.com - Nov 02, 2016)